Medical Orthopedic Electric Surgical Oscillating Saw-A+100

Medical Orthopedic Electric Surgical Oscillating Saw, which is small size light weight and good handfeeling making it easy to hold in operations. This system can applied for trauma joint neurosurgical thoracic surgery ect.

Features of Medical Orthopedic Electric Surgical Oscillating Saw

1. Imported Motor
2. No Limit speed-changing
3. High Coaxiality, Low-Noise
4. Ergonomic design
5. Dual Function: drill chuck, k-wire; flexible reamer
6. Whole unit can be autoclavable at 135 °C (Improved type ≤ 155 °C ),with 1.6Mpa

Technical data

Battery type
Ni-MH battery
Battery capacity
1800mAh
Operation(V) voltage
14.4V
Radial circle run-out
≤0.1mm
Axial movement
≤0.5mm
Biggest drill bit diameter
8mm
Diameter of Cannulation
4.5mm
Sterilization
≤135℃
Noise
≤75dB

Product Details of Medical Orthopedic Electric Surgical Oscillating Saw

NOTE:
1. Sterilize temperature ≤ 135 °C (Improved type ≤ 155 °C ), if the temperature is over 135 °C, the motor could be damaged.
2. Normal bone drill can only hold drill bits less than 6mm, acetabulum reaming drill with big torque,rpm is around 300, canulate drill is used with nail or K wire, rpm is around 600.
3. The battery need to be get out of the power tool after surgery. Otherwise the small automatic discharge of the electric will make the life of the battery short.
4. The battery cannot be sterilized, it is not autoclavable.
5. The cranial bur must be washed right after the surgery by purger in order to avoid the blood stick in the bur, make sure it
stays dry.
6. The battery space in the handpiece of the tool should not have any water, after sterilization.
7. The cranial bur blade is made of medical stainless steel, in order to avoid broken, so it is flexible and not very hard, it is
easy to be attrite, we suggest each blade only use for 1 surgery.

Package of Medical Orthopedic Electric Surgical Oscillating Saw